Carpet Area vs Built-Up Area vs Super Built-Up Area: What You Really Pay For

The difference in carpet area vs built-up area is simple: carpet area is the floor space you can actually use inside your flat, while built-up area adds the walls and balcony, and super built-up area adds your share of lobbies, lifts and other common spaces. Always compare flats on carpet area.

Two brochures can show the same “850 sq ft” and still describe very different homes. One may be quoting carpet area and the other super built-up area. If you do not know which number you are looking at, you cannot tell which flat is better value. This guide clears it up.

What is carpet area?

Carpet area is the space inside your flat where you could lay a carpet. Under the RERA Act, it means the net usable floor area of an apartment. It includes the area covered by the internal partition walls. It does not include external walls, service shafts, an exclusive balcony or verandah, or an exclusive open terrace.

This is the number that tells you how much room your family will really get. RERA also requires developers to quote and sell homes on the basis of carpet area, which is why you will see a “RERA carpet area” figure on every registered project.

What is built-up area?

Built-up area is the carpet area plus the space taken by the outer walls of the flat and the attached balcony, utility area or terrace. It is the full footprint of your unit.

You do pay for the walls and balcony, but you cannot place furniture inside a wall. So built-up area is always bigger than the space you can use.

What is super built-up area?

Super built-up area is the built-up area plus your proportionate share of the building’s common areas. That usually covers the lobby, staircase, lift wells and corridors, and often the clubhouse and other amenities.

The gap between carpet area and super built-up area is called the loading. A building with large lobbies and many amenities will normally have a higher loading than a simple building with a single lift.

Carpet area vs built-up area vs super built-up area at a glance

Term What it includes Why it matters
Carpet area Usable floor inside the flat, including internal walls The space you live in. Use it to compare flats.
Built-up area Carpet area + outer walls + balcony or utility area The full footprint of your unit.
Super built-up area Built-up area + share of lobby, lifts, stairs and amenities Often the figure used in older listings and resale quotes.

A worked example

The numbers below are only an illustration to show the method. Every project is different.

  • Flat A is quoted at ₹90 lakh for 900 sq ft super built-up. Its carpet area is 600 sq ft.
  • Flat B is quoted at ₹90 lakh for 650 sq ft carpet.

On paper, Flat A looks bigger. On carpet area, Flat A costs ₹15,000 per sq ft (₹90 lakh divided by 600), while Flat B costs about ₹13,846 per sq ft (₹90 lakh divided by 650). Flat B gives you 50 sq ft more usable space for the same money.

To find the loading on Flat A, subtract carpet area from super built-up area and divide by the carpet area: (900 minus 600) divided by 600 = 50%.

How to compare two flats correctly

  1. Ask for the RERA carpet area of each flat in writing.
  2. Divide the all-inclusive price by the carpet area to get the real rate per sq ft.
  3. Check the balcony and utility area separately. They add comfort but are not part of carpet area.
  4. Look at the floor plan. A well-planned 600 sq ft flat can feel bigger than a poorly planned 650 sq ft one.

Where buyers get confused

New projects registered with MahaRERA quote carpet area. Many resale flats and older listings still quote built-up or super built-up area. When you compare a new launch with a resale flat, convert both to carpet area first.

This matters most for compact homes, where every square foot counts. If you are looking at 1 BHK flats in Thane or 2 BHK flats in Thane, two homes with the same label can differ by a full room’s worth of space.

The carpet area is also printed in the registered agreement for sale. Make sure the figure in the agreement matches what you were promised. Our guide on 1 BHK flats under ₹60 lakh near Thane station shows how much the usable area can vary within one budget.

Frequently Asked Questions

Which area is used to register a flat?

For projects registered under RERA, the agreement for sale states the carpet area of the apartment, and the developer has to sell on that basis. Always read the area clause in your agreement and compare it with the approved floor plan before you sign.

Is the balcony part of carpet area?

No. Under the RERA definition, an exclusive balcony or verandah and an exclusive open terrace are not counted in carpet area. They are shown separately. Ask the developer for the balcony area so you know the full usable space you are getting.

What is a normal loading percentage?

There is no fixed rule. Loading depends on the building design and the amenities offered, so it differs from project to project. Instead of judging the loading alone, work out the price per sq ft of carpet area and compare that across your shortlist.

Why do resale flats quote built-up area?

Many older buildings were sold before carpet-area pricing became the rule, so owners and brokers still use the figures from the original paperwork. Ask for the carpet area, or measure the flat, before you compare it with a new project.

Need help shortlisting? Talk to the Urvik Consulting team on +91 9999221552 or send us your requirement. Tell us your budget and preferred location and we will share options that fit.

Find The Perfect House